Construction Cost: Key Cost Factors + Construction Calculator
Construction cost in Kenya usually varies depending on many factors such as the typography of land, size of the building, and specification of materials among other elements.
Here are some key determinants of cost
Location of the Project
Which area are you planning to build your house in? Well, the cost of construction varies whether it is an urban or rural setup area. Do you own a plot already? If you have a plot already then it is much cheaper than a person who is planning to buy a plot as well. If you are buying a plot, the secret is always locating the house in the desired area with a favorable climate and set up the infrastructure.
The House Plinth Area
Plinth area is the covered built-up area measured at the floor level the house. The plinth area is also called a built-up area and is the entire area occupied by the building including internal and external walls.
How does the plinth area affect the cost? The bigger the plinth area, the higher the cost. If the plinth area is 80SQM (square metre) and the construction cost -the rate of a locality is Ksh. 27,000/- per square meter, the approximate cost of a similar proposed building of 80 square meter plinth area shall be Ksh. 27,000 X 80 = Ksh. 2,160,000.
This estimate is however, approximate and the actual cost may vary by up to 10% more or less. Change of location also causes slight variation due to the increase or decrease in material transportation charges and labor. Plinth area rates depend on the type of finishing. .
Type of finishes
Finishes include interior and exterior works like wall finishes, floor, ceiling, lighting, fittings etc. The quality of finishes greatly determines the cost of building a house in Kenya. High quality finishes significantly increase construction costs. Total construction cost ranges from standard of Ksh.27,000 per square meter to executive finishing of Ksh.37,000 per square meter
Other house features
The internal and external features of a house are key determinants of building costs. Reducing the size and number of windows, for example, can lower your building costs while doing high roof pitches can greatly increase your costs. For roofing, using materials like decra roofing instead of box profile mabati will have a significant variance in cost.
We have a Simplified Construction Cost Calculator for you below, use it to get the project estimated cost!
How To Use The Construction Cost Calculator
Step 1: Adjust the Plinth Area to the estimated Total Area of your upcoming house. E.g, 2 Bedroom = 60 Square Metres, 3 Bedroom from 80 Square Metres, etc…
Step 2 : Choose the Type of Finishing, Roofing Type, and Flooring Type. Approximate project cost will be indicated below this.
Step 3: You can also include contact details and submit
HPD Consult +254722888721 Email: [email protected]