What Does Load-Bearing Wall Mean In Construction? A load-bearing wall is a wall that is specifically designed to support the weight of the structure above it. These walls are crucial in maintaining the stability of a building, as they transfer the weight of the roof, floor joists, and other elements to the foundation. Load-bearing walls…
What Does Continuous Footing Mean in Construction? A continuous footing is a type of foundation that’s used in construction to provide support for a building’s walls. It is a strip of concrete that’s poured into the ground, running continuously under the walls of the building. The continuous footing is typically wider than the walls of…
What Does Stepped Footing Mean in Construction Stepped footing is a type of foundation used in construction to support the weight of a building. It is called “stepped” because it consists of a series of concrete blocks, each with a slightly smaller size than the one beneath it, that form a staircase-like structure. The stepped…
What is a Micropile and its Importance in Construction? Micropiles are a type of deep foundation system that are used in construction to transfer loads from the surface to deeper and more competent soil or rock strata. They are typically made of steel, with lengths ranging from 10 to 60 feet, and diameters ranging from…
What is Piering Foundation? | Piering Foundation Cost | Types of Piers for Foundation Repair What Is Piering Foundation? Piering foundation is a process of stabilizing the soil beneath a building’s foundations to prevent settlement. This can be done by inserting steel rods below the footing and filling the space with concrete or grout. This…
Types of Damps| Causes of Dampness | Effects of Dampness in the Building | DPC What is Dampness Dampness can be defined as the presence of moisture in the various parts of buildings, such as the floor wall roof, etcetera. Dampness is either formed due to condensation within the structure or intrusion from outside. The…
Culverts | Types of Culverts| Box Culverts | Pipe Culverts | Arch Culverts What are Culverts? Culverts can be defined as small channels that allow water to flow under a railroad, trail, road or similar obstruction from one side to the other. A culvert is a drain of the watercourse, totally enclosed and usually carried under…
Different Types of Masonry Bonds| Stretcher Bond | Flemish Bond | English Bond What is a Bond?/ Masonry Bonds A bond is an arrangement of masonry units in successive causes to tie the masonry together, both longitudinally and transversely. The arrangement is usually worked out to ensure that no vertical joint of one course…
Dumpy Level | Uses of Dumpy Level | Dumpy Level Calibration What is a Dumpy Level? Dumpy level is an optical instrument used to establish and checkpoints in the same horizontal plane or surface. The tube is also used to measure horizontal levels. It consisting a telescope firmly secured into adjusting screws. Mostly leveling kit…
Plain Cement Concrete (PPC)| Column Formwork | Concrete Curing Plain Cement Concrete (PPC) Plain cement concrete is concrete without steel reinforcement. Plain Cement Concrete is often used in foundation beds, and this is provided as based concrete for laying the foundations and flooring. The purpose of providing a PCC bed is to have a uniformed…
End of content
End of content
Important Notice: Check Your Email for Download Link After Order. Thank You! Dismiss
